We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Item introduction

Male JIC EPT Fitting Bulkhead Adapter (Stainless)

Technical Assistance
QC Hydraulics engineering has the potential to style drawings conform to SAE, BS, JIS, DIN & ISO technical specs. And we can also make in accordance to customers’ drawings or samples.

Associated Products 

Material Te EPT Certification(EN15714/3.1)
We can give the M EPT for every shipment.

Manufacturing Process

Deal and Transport

Our Certification
QC Hydraulics has been granted ISO 9001:2015 & S EPT certificates for processing stainless steel hydraulic hose fittings and adapters.

Why Decide on Us?

one. Heritage:
QC Hydraulics is an ISO 9001:2015 qualified company with above 20 year’s manufacturing encounter, specializing in hydraulic hose fittings and adapters. We only target stainless steel material, no carbon metal or brass.

2. Product range, reliable quality:

one. EPT Hose Fittings
1). forty three Collection Crimp Hose Fittings/Couplings
two).  EPT Series Crimp Hose Fittings/Couplings
3). BW Collection Crimp Hose Fittings/Couplings
4). Stainless Steel Hose Ferrule For SAE 100R 1AT, 2AT Hose
five). Stainless Metal Female JIC seventy four Degree Flare Hose Fitting
six). Stainless Metal Feminine B EPT sixty Degree Cone Hose Fitting
seven). Stainless Metal B EPT Male 60 Degree Cone Seat Hose Fitting
8). Stainless Steel Woman B EPT 60 Diploma Cone ninety Elbow Hose Fitting
nine). Stainless Metal NPT Male Hose Fitting

2. EPT Adaptors
one). NPT Pipe Thread Adapters
2). O-ring Manager SAE/ EPT Adapters
3). JIC 37 Diploma Flare Adapters
4). NPSM Pipe Thread (female swivel) Adapters
5). O-ring Confront Seal (ORFS) Adapters
6). BSPP/BSPT Adapters

three. Stainless DIN Metric Tube Fittings
4. Stainless reusable hose fittings
5. Reduced force stainless steel thrust on hose finishes and hose barbs

three. High quality Handle Of Raw Substance:

one. We only decide on the highe EPT top quality stainless steel uncooked materials. And metallic suppliers offer materials te EPT certificates for each and every cargo.
2. We one hundred% evaluate the dimensions of bar stock and forging blanks by callipers for every single shipment.
3. We use the Transportable XRF Analyser to te EPT the key chemical elements of bar inventory and forging blanks with ten% for each and every cargo(Key chemical aspects contain Cr, Ni, Mo, these chemical elements are really crucial for the corrosion overall performance) 
four. In addition to, we randomly pick up many of slicing items to do further chemical investigation by spectrograph each ten times to make sure the raw substance one hundred% qualified.

four. High quality Manage Of Production Approach:
1. We are employing Sigma Substantial-Precision CNC Lathe Equipment to manufacture stainless metal hose fittings and adapters.
The attributes of CNC Lathe Devices:
one). Twin-axis, EPT program
2). Thread reducing resources: EPT Japan, vargus & carmex Israel(Have a really secure overall performance in the course of machining)

two. We use  callipers to evaluate the basic sizes. And we use  the thread gages to inspect the threads.

three. We use Contracer & Contour Measuring Equipment to examine the extremely tiny angles and diameters.

five. Inspection:
1. Fir EPT Article Inspection During Method
1).The operator make the fir EPT article in accordance to manufacturing drawings. 
two). The operator will examine the fir EPT report and record. If the dimensions and threads meet up with the manufacturing drawings, and then the fir EPT report will be set in a particular box( the box is for fir EPT post only).
three). Workshop foreman will just take second inspection for the fir EPT write-up.
4). Only passing the inspection by workshop foreman, and then start with mass manufacturing.

2. Mass Production After Fir EPT Write-up Inspection
1).Following the fir EPT article approved by operator and workshop foreman, and then begin with mass creation.
two). During mass creation, the operator wants to inspect the threads every single 10 pieces, and measure the sizes every fifteen parts. As soon as any fittings of threads and proportions out of the specs, all this batch of fittings will be inspected comple tel: +86~thirteen 0571 88828y.
three). The experienced fittings will be fitly put in a plastic box piece by piece.
4). Finally, the finished fittings will be transported to inspection division for final inspection.

three. Closing Inspection
1). Appearance: one hundred% inspection beneath strong mild. No scratch, No burr.
2). Key measurements and angles: 15-20% randomly inspection by callipers and contracer. When any measurements and angles of fittings out of specs or doesn’t respect to drawings, this batch of fittings will be compelled to return back to generation workshop to enhance or make a new alternative.
3).Threads: 15-twenty% randomly inspection by appropriate gages. Once any threads out of specs or will not respect to drawings, this batch of fittings will be pressured to return back again to production workshop to improve or make a new substitute.

6. Right after Support:
When clients have any grievances about our merchandise,  we will get a swift motion.
We can 100% make a new alternative for cost-free when the shopper has a criticism about our items.

Our Exhibition

FAQ

Q: Are you a trading firm or maker?
A: We are a 100% manufacturer, major items protect stainless steel hydraulic hose fittings and stainless steel hydraulic adapters.

Q: Do you have stock?
A: Currently we manufactured to order, but we do have some shares for typical variety raw materials. So we can make a fast action for some urgent orders.

Q: Do you have a MOQ request?
A: Normally our MOQ is two hundred parts. But for some bigger sizes, 50 or one hundred items is also acceptable for the fir EPT get.

Q: How about your payment approach?
A: 30% deposit in advance, the balance payment once again EPT the duplicate of Invoice of lading. Of system, I consider almost everything is negotiable.

Q: What about your supply time?
A: About 45 days for typical orders. But it is dependent on the purchase volume. Of system, if you have an urgent purchase, we will try be EPT to fulfill you.

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the detailed substitution parts contained herein are not sponsored, accredited, or made by the OEM.